Further enhance the plank treatment efficiency of the new productBystronic product developments: in Competence Days local activities and "EuroBLECH digital innovation summit" online activities, Bystronic shows its in laser cutting, bending, automation systems and software in the field of the latest products and solutions.Main content is how to realize the intelligent networking plate processing equipment, so as to further enhance the production efficiency.

In order to better in the increasingly fierce competition environment help plate processors, Bystronic now opens a new optical Fiber laser cutting dimensions: 15 kw laser power ByStar Fiber.It represents a highly sophisticated Bystronic high-end fiber laser technology, the stability of the cutting process and the highest laser power, but also represents a wide range of applications.From 3 to 12 kw power level to the 15 kw, it was a great technological leap: compared with the previous 10 kw laser, ByStar Fiber using 15 kw laser cutting speed can be increased by 50% on average.Thus, plate processors can from higher productivity and lower the unit cost of benefit, because use 15 kw new ByStar Fiber can be accurately and reliably cut 1 to 30 mm thick steel, aluminum alloy and stainless steel, and the thickness under 20 mm brass and copper.15 kw laser power can be used for up to 50 mm thick steel and aluminum alloy of other purposes, for the mass production and temporary customer order maximum flexibility.Aluminum alloy, non-ferrous metals and steel, efficient Bystronic cutting head can with maximum precision cutting thick plate and profiles.

In 3015 and 4020 ByStar ByStar all can obtain the new power level.

, Bystronic laser power are available up to 8 or 10 kilowatts of Fiber laser cutting system BySmart Fiber.With the enhancing power, now plate processors available BySmart Fiber more fast, more accurate cutting plate.According to the scope of production and customer demand, BySmart Fiber can provide 3 kw, 4 kw, 6 kw, 8 kw and 10 kw laser power (BySmart Fiber 3015 has been more than 2 kw).Using 8 kw laser power, user can significantly improve the cutting speed.For example, compared with 6 kw laser power, cutting speed of 3 mm stainless steel plate can be increased by 60% at most.A 10 kw laser power lead more obvious.BySmart Fiber切割 10 毫米厚不锈钢的速度可加快 2.5 倍。针对所有厚度，8 kW 型号在不锈钢板材产量方面可提升至最大 2 倍，10 kW 型号可提升至最大 2.5 倍。

So the user can with special cutting quality of the fine processing of maximum thickness of 30 mm materials.This for those who pays attention to the appearance of cutting piece of thick material cutting order to bring more possibilities.Higher power through 3015 or BySmart BySmart Fiber 4020 won.

ByTube 130 is to help the plate processors to expand the product series is the ideal solution.Laser cutting is aimed at cutting and drilling of alternatives in the future.Optical fiber laser can put them together and accelerating sharply.Automatic weld identification features make raw materials manually aligned become redundant.Another reason to choose fiber laser, the stable and uniform cutting quality.Due to the cutting edge is very neat, could save deburring process.

ByTube 130 perfectly suitable for processing of 10 to 130 mm diameter pipe material, can handle up to 8.5 meters of the workpiece.It has 2 kw and 3 kw power level, highlighted extra fiber laser remarkable energy efficiency of the unit.Through additional options (" engineering ": in all cutting conditions can achieve high accuracy, and the" Quick Cut: faster, higher power), operation convenience and production quality can be personalized additional configuration.

Novice without rich experience can use ByTube 130 start production process.With the aid of specialized development interface ByVision Tube, all relevant pipe laser cutting function can pass the touch screen is simple, intuitive control.Interface is clear and easy to understand, and cut orders set up very quickly.The automation system manual intervention can be dropped to the lowest degree, thus the manufacturer can very easily into the pipe processing field.

Because for many plate processing enterprises, automatic laser cutting to be crucial to the success criteria.Optical fiber laser cutting automation solution has another decisive advantage: laser cutting equipment load rate can be up to the maximum, thus exempt operator laborious material handling work.

This all-new laser cutting system "ByTrans Modular" up-down material Modular automation solutions with laser cutting equipment of clients to provide many solutions and layout, whether for mass production or small orders, can better serve the needs of their automation.Including master pieces of unloading management or recycled surplus plank.

According to customer requirements and customized automation solution with high configuration of the free, can achieve a shorter cycle time, improving productivity and significantly reduce the operator's workload.Perfect processing of the board of no or less people watch the next step is to combine BySort this fully automated sorting system.Bystronic system according to the order situation in order to fully automatic and semi-automatic material flow pattern of organization, there is enough space left in laser cutting system, so that the manual processing small orders at any time.

Not all plate processing enterprises have enough space to set up new equipment or the expansion of the existing equipment.Bystronic through the new "ByTower Compact" solutions to help customers in the most ideal way: with small area, the scheme can automatically by the pallet change function for various enterprise scale to achieve less people watch or unattended.The plan will work process of laser cutting system automation, and a sharp rise in the unit time cutting work pieces.

The clever design of the benefit from ByTower Compact, plate processors do not need to how much space can increase the productivity of Bystronic laser.According to the demand for custom storage tower height, so as to make full use of effective space.System can use two kinds of different configuration (with or without wooden pallets), so that according to the supply position of store plate set directly to the machine.As a result, material available immediately.

Is not a utopian fantasy, but Bystronic created reality: bending can harvest perfect results for the first time.With a new generation of LAMS Angle measuring system, a unique plate rebound compensation can do this.

For example, high tensile strength materials will be used in agriculture, in the automation project trailer or automotive industry.At this point to avoid material springback.When processing to more than 20 ° or may appear this phenomenon.Unique which Pro plate rebound compensation function can avoid this problem.The function from the start is the escort perfect bending.

It is the LAMS Angle measurement system to realize the process reliability.The system can make up for the material thickness deviation.In addition to the thickness fluctuation, the reliable Angle measurement system can compensate the springback and rolling direction deviation.In addition, you can save the plank of fixing the parameters and sending them to the other machines - even when the machine is not equipped with LAMS.As a result, the business enterprise inside to use all of the other Bystronic bending machine can also benefit from this feature.

Which Pro the opportunity for the operator to save a lot of modification work.At the same time also can lighten the burden of Bending process programming staff: software ByVision Bending according to material thickness and the bend Angle to calculate the Bending process of ideal.Data import help without interruption of production run at the same time realize the off-line programming.Therefore, high-end bending machine can meet all the requirements of customers in terms of comfort.Bystronic new which Pro will increase the speed and precision of bending to unprecedented heights.

Bystronic 40 is a compact high-speed machines, which ensure the low cost and small workpiece the simplest operation: "plug-in and Bend", said the installation and began to Bend.Compact model is especially suitable for the space is little and the production capacity of uncertain: the condition of the machine tool can be flexibly assembled in 5 minutes and immediately put to use.

A new features help plate processing enterprises to operate more accurate and more efficient: Optical Tool identification "Optical Tool Detection".Solution: cameras identify tool on the qr code, and if mistakes are found, will be sounded the alarm.Because the tool will often comes to the wrong position.Advantage: because the tool is always in the right position, so as to save the installation time and ensure the process quality.

Bystronic Xpress set lead bending technology and attractive price.Multi-purpose free Bending and high precision processing, ByVision Bending intuitive interface preliminary master Bending technology, help customers quickly and at each process step can give you help.Bending workpieces has never been so easy.Bystronic new Xpress is also provided to European customers, it combines leading bending technology and attractive price.Xpress有 50、80、100 和 160 各个不同型号，其压力吨位分别在 50 至 160 吨之间，折弯长度则在 1050 至 3100 毫米之间。

Accuracy is the most important measure of bending machine.Therefore, Bystronic development in Xpress ByMotion driving control system can ensure that the work on the counter and after block gauge precision acceleration.After different cutter clamping device and block gauge system allow individual adjustments according to the working environment.Can be successfully configured according to need a variety of optional equipment, materials and work under the counter for example can automatically compensate deformation mechanical deflection compensation system.

The bending machine work is a daunting task.Not only plate, cutter is also very heavy.The operator must first remove bending tool from the tool in the library, and then carried to the machine.It takes strength to work on the counter installed especially: the cutting tool must be on the chest height in clamping system.

In addition to power, tool change also need time.Most time required for operation of the installation can be accounted for 70% of the bending process.And plate processing more and tend to be small batch size, so installation is also becoming more and more frequent.Today, the operator usually only need a few units can be equipped with new tools for the machines to produce different parts, then to make another parts.Especially for contract manufacturers, setup time is increasingly becoming the key factor in the process of bending.

Automatic tool change device greatly shorten the installation time, at the same time ease the pressure on the operators.Bystronic at a very early age are aware of this potential, and in 2016 launched the first automation solution.

The Modular Tool Changer, has now launched the latest bending machine which Pro.It can be in the process of bending efficiency up to 30%.With the help of the latest sensor can achieve higher precision.After the long work shift, the operator sometimes don't have enough energy to precise placement tool.Use this kind of situation will happen six axis manipulator.According to each bend tasks automatically from the integrated tool library to retrieve the appropriate cutter head, and then drop it on top and bottom work bedplate of clamping system, accurate to mm.